Welcome to my blog!
It's all about whimsy, art and Halloween!

Thursday, July 4, 2013

Dad's Framed Tie Display



I saved my dad's ties and tie tack collection when he passed. It took a while to think of how to display them, but I hatched a plan to make a fun framed homage to Dad!

Watch my Dad's Framed Tie Display YouTube video tutorial!
 

Materials:
Aleene's Fabric Fusion Peel and Stick Tape
12" x 12" x 2" dimensional frame
1/4" dowel
Drill
1/4" drill bit
Clear packing tape
Scissors
Ties
Tie tacks, pin and bars

1. Lay out your ties in layers that look good to you and are 12" wide.  Lay packing tape over them to keep them from moving.  Cut excess fabric about 2" beyond the tape.

2. Remove the frame insert and lay over your ties.  Make all the adjustments so the ties fit into the insert.  Use the packing tape to hold the position of the bottom end below where the the frame stops.

3. Measure 3/8" down from the top edge of the insert and mark the center.  Use a small block of wood inside the insert as you drill a hole on the mark.  Repeat at opposite ends on two of the outside edges.   The idea is to slide the dowels in place at the top and bottom to wrap the ends of the layered ties around.

4. Measure and cut the dowels to fit in the holes and cut them so they don't extend outside of the insert.

5. Stand the insert upside down and lay the top of the layered ties, back side facing up, inside with the excess toward you.  Slide the dowel in over the ties.

6. Lay 2 strips of Fabric Fusion tape on the ties (on either side of the dowel.  Remove the tape backing and fold the excess over the dowel and press securely in place.

7. Repeat for the bottom, making sure to pull the ties tight when securing.

8. Add the tie tacks , pins and bars to the front.  Slide the insert into the frame and place the back of the frame on to secure it.




Saturday, June 29, 2013

Wire Bound Dog Book

Mini Keepsake Dog Book Candace Jedrowicz

Pets bring so much love into our lives! Here's a fun and easy way to create a loving tribute to the family pet, with humor and panache.  This mini book is die cut, decorated and then assembled with buttons and wire.

Watch my Mini Dog Adventure Book YouTube video tutorial! 
 

Materials:

Buttons  - I used Blumenthal Lansing buttons
Aleene's Tacky Line Runner
Aleene's Tacky Glue Pen
Sizzix Originals - Album Cover & Page Die (or hand cut pages)
Cardboard for the book covers
Card stock for the pages and to cover the cardboard covers
Decorative card stock
Photos and/or drawings
Printed story
Embellisments - gems, tag board bits, letters, fibers and charms
Felt pen to edge the pages - I used black
20 Gauge wire - I used copper
Round nose pliers
Chain nose pliers
Wire cutters

1. Cut 2 covers and several pages.  Print the story with plenty of space to cut out the words and phrases.

2. Cover the cardboard book covers with decorative paper using the Tacky Line Runner.  Tape pages back to back, as well.

3. Edge the cover and pages with black felt pen.

4. Lay out the story and photos in order.  Cut backing for the photos from complementary papers. Add the spacer buttons which will line up with the spine holes on the front of each page. These will allow for lots of 3D embellishments. 

Mini Keepsake Dog Book Candace Jedrowicz Side

5. Tape photos and backing onto the pages.

6. Glue on buttons and embellishments.

7. Cut 3 6" pieces of wire.  Feed one wire through each set of spine holes.  Use the round nose pliers to wrap spirals on each end of wire, wrapping right up to the book.  The wire allows the book to open and close easily.

















Thursday, June 27, 2013

Featured in Favecrafts.com E-Book!



One of my projects is in Favecrafts.com new e-Book

It's called Wire Wrapped and Beaded Picnic Utensils and it's a super easy way to dress up your picnic flatware!  The e-Book is free to download and has lots of fabulous tutorials and recipes to make your summer gatherings spectacular!

Favecrafts.com is a treasury of crafts at your fingertips!  You can search anything at all there and learn everything about it!  Be sure to sign up for the newsletter to get up to date and relevant project info several times a week!

Sunday, June 23, 2013

Traveling Roots: Gypsy Canvas


P-Candace-Gypsy-Tree-Canvas

I am mesmerized by gypsy style.  It's not surprising that I would turn to that soulful, expressive style to tell a story about my own path.

Watch my Gypsy Canvas Wall Art YouTube video tutorial!
 

Materials:
Aleene's Super Thick Tacky Glue
Aleene's Original Tacky Pen
6" x 6" Canvas
Gypsy caravan photo from Wikimedia commons
Decorative Paper - I used an embossed paper as a key part of my design
Black craft foam
Die cutter and dies - Tim Holtz Mini Bird and Cage, Tiny Tabs and Tags, Mini Lock and Key Set and Branch Tree
Doo dads - I used a polymer clay face (push mold Art Doll Faces), Tulip Beads in a Bottle dots in several colors (make them ahead on waxed paper so they'll peel right off) - or you can use anything you have to personalize
Metallic paste - copper
Lumiere paint - pink gold, blue, bronze and olive
Sand paper
Brown acrylic paint
Brown distress ink pad
Drill with 1/8" bit
Needle tool
6" piece of 20 gauge copper wire
Round nose pliers
Chain nose pliers
Assorted fibers

1. Cut decorative paper to fit front and sides of the canvas.  Glue in place with a thin, even coat of Super Thick Tacky Glue.  Allow to dry.

2. Cut 1 tree of embossed paper and one from black craft foam.  Glue together with Tacky Pen.  Allow to dry.  very gently run a finger tip dipped in copper metallic paste over the top of the embossed design.

3. Cut a 1" x 6" piece of foam.  Position the foam on the Branch Tree die so that it just covers 1/2" of the bottom of the die.  This leaves some foam sticking out, fold it over the top plate to avoid tearing.  Run it through the cutter.  Use a finger to paint olive Lumiere paint.

4. Cut a small tag from the Tiny Tabs and Tags die from foam and 1 from embossed paper.  Glue together,  Allow to dry.  Treat with copper metallic paste as you did with the tree.

5.  Paint your moon face with pink gold Lumiere.  Allow to dry.

6. Cut a foam key from the Mini Lock and Key Set and a cage and bird from the Mini bird and cage set.

7. Paint the key bronze, the birdcage copper and bronze and the bird blue with bronze beak and feet.  Glue the bird to the cage.  Allow to dry.

8. Sand the edges of the paper on the canvas until they are smooth and the canvas shows through.  Paint the exposed canvas with brown acrylic paint and spread a bit onto the papers.  Allow to dry.

9. Drill a hole in the center of the bottom of the canvas.

10. Fit the bottom of the tree into the strip of green foam and glue in place on the canvas using the Tacky Glue Pen.

11. Color the edges of the photo with distress ink and glue into place with the glue pen.

12. Add the foam key and Beads in a bottle dots with the glue pen.

13. Cut 12" of assorted fibers.  Feed them through the hole in the small tag and tie.  Glue the tag in place.

14. Make a hole in the top of the bird cage with the needle tool.

15. Wrap the copper wire around the round nose pliers and crimp with the chain nose pliers to make  loop.

16. Slide the bird cage on to the loop, slide the wire ends through the hole in the canvas and bend the ends down to secure it.



Tuesday, June 18, 2013

Kitschy Shoe! Bless ya, Hon!



My latest kitschy art piece is an homage to "The Avenue" in Hampden, Maryland. An avenue immersed in the kitschy culture of Baltimore in the 1960's that was the frame for John Waters' movie Hairspray. A real high heel shoe, cut in half, serves as the foundation for this framed art.

Watch my Kitschy High Heel in Frame YouTube video tutorial!
Materials:
Aleene's Super Thick Tacky Glue
Buttons - I used tons of gorgeous Blumenthal Lansing buttons
12" x 12" dimensional frame
One high heel shoe - cut in half length wise with a band saw using a carbide tip multi-purpose blade
Decorative paper
Gems, letters, tiny nick knacks, doo dads and memorabilia
Hot glue

1. Cover the inner sole of the shoe half with decorative paper.

2. Add layers of foam or whatever you have to be sure the shoe will have complete contact with the frame back. Use Super Thick Tacky Glue to attach the shoe to the background. Allow to dry overnight.

3. Place your message first - I used a postcard above the shoe, so the letters were arranged around it.


4. Add your embellishments - I glued a base layer of buttons on the shoe, then glued everything I could fit over that, keeping my favorite buttons visible.

5. Add any embellishments to the background. My only regret that I didn't have a tiny pink flamingo and horn-rimmed glasses to add!



Sunday, June 16, 2013

Heart of the Belflower Tree




The Forgotten Language of Flowers
“In the early 18th century the Turkish "Secret Language of Flowers" was introduced to Europe by Lady Mary Wortley Montague, wife of the British ambassador to Constantinople. Flowers had long been a sign of romance but now lovers were able to send secret messages to each other by means of sending a posy of flowers. Each flower had a specific meaning and the order of arrangement had much to do with the intended "message". The French seem to have taken this idea to heart. In 1819 a French woman writing under the pen name of Madame Charlotte de la Tour (Louise Cortambert), wrote and published "Le Language des Fleurs" which offered seasonal floral and anecdotal advice to those wishing to send "secret" messages to each other.
The following list of flowers comes mainly from that original book but has been augmented to include some common flowers of today as some of those from yesteryear are unknown. Enjoy this glimpse into the past and keep this in mind the next time you send or receive flowers!”

Bell Flower: Constancy; Gratitude
                                   By joelessacredgrove.com


The process of creativity begins with a problem. That may sound silly, but, from that thought/problem comes the idea for a solution followed by the action of solving that problem. Let me take you through that process from mental seeds to physical tree with this fun and easy tutorial.

Watch my Wrapped Wire Beaded Tree YouTube video tutorial!
 

Materials:
14 gauge wire - 10" or more
22 gauge wire - a roll of it
Round nose pliers
Wire cutters
Chain nose pliers
Hot glue
Frame - optional
Charms to hang on the tree - optional

1. Cut 2 pieces of 4' 14 gauge wire and fold in half.  Fold a bent wire 2" from the bend and bend in the opposite direction on both sides of the bend.

2. Pinch the two folded parts and twist. These will be roots. Repeat with the other 4" wire.

3. Cut a 2' piece of the 14 gauge wire and bend one end, twisting to make a 5th root.

4. Holding the roots together, begin twisting the tree truck wires together.  Add as many extra wires as desired to add bulk to your trunk.

5. Decide where the branches will open up and separate them.

6. Cut 20 or more 2" pieces of 22 gauge wire and fold them in half.  Twist each for added strength and thickness.

7. Begin wrapping the smaller wires around the trunk, working upward and around the branches until you have the look you want.

8. To add charms, curl the ends of the branches, slide the charm on and secure by completing the curl.  I made charms from purple flower shaped beads with gold bells and leaf beads.

9. To add into a frame make sure the roots and branches have a flattened back side

10. Make sure there are plenty of contact points between the frame, backing and tree for the glue to create a good bond.

P Wrapped Wire Beaded Tree Candace Jedrowicz

Wednesday, June 12, 2013

Owl Mail



I've been having so much fun coming up with ways to make art mail!  Cake mail made from a sponge was too much fun NOT to explore further.  What else can be made from a sponge?  An owl postcard!  Hoo wants to try it?


Watch my Owl Mail YouTube video tutorial!

Materials:
Aleene's Super Thick Tacky Glue
Grout Sponge, or smaller sponge
Tissue blade - it's a super thin razor blade used for polymer clay
Marker
Felt
Eileen Hull's Sizzix die Flowers with Heart Petals (optional - to use for the felt eyes)
Buttons
Needle - a narrow 2" long one is best
Strong thread
Paint
Paint brush
Tooth brush (optional) I sued to pounce on the felt pieces to push glue deeper into the sponge
Owl Pattern
Owl Pattern for Felt Cutouts

1. Print and trace the owl pattern onto the sponge.

2. Use the tissue blade to saw the sponge carefully

3. Paint the whole sponge and allow to dry.

4. Cut eye, beak and wing patterns from felt.  My wings were ovals with flat bottoms and that worked for me.  Play with the pattern to get the look you like.

5. Using lots of glue, glue the felt eyes in place.  Pounce on the felt with the tooth brush to help the glue get into the sponge, if desired.

6. WHILE THE GLUE IS WET, sew the buttons in the center of the eyes, pulling slightly to make sink in to the sponge a bit.

7. Glue beak and wings in place.  Pounce with tooth brush, if desired.

8. Trace the sponge on cardstock and cut out.

9. Before gluing to the back of the sponge trim the cardstock to make sure no edge will stick out from the sponge.  Glue on and allow to dry.

10. When you address the postcard, remember that the post office will only deliver to the address that is lowest on the postcard and that they need room to put 2 stickers on it.

P Owl Mail Candace Jedrowicz