Day of the Dead Shrine for My Parents

This is a ceramic sculpture box I made last year. I love Dia de los Muertos! It's a Mexican Holiday that celebrates ancestry. This quote really speaks to me...

“The Mexican flatters death and woos death, he sings to her, dances with her, he laughs at her. Finally he challenges her and in the challenging, death loses her power to intimidate him. Once he knows death intimately, death is no longer wrapped in a cloak of mystery or causes him to fear the darkness

Once the fear of death has been defeated, the clutch she has on the hearts and minds of the living is lessened once and for all. Death’s morbid side is buried under music and remembrances, while skeletons laugh and dance and sing as Mexico celebrates life in its embrace of death.”
Judy King

So, the Crafty Chica (http://www.craftychica.com/) had a Day of the Dead Shrine contest and I was so excited about it! I knew I would enter, but had no idea where to start. My dad died in May. He was a rocket scientist, so I had visions of rocket ships and skeletons. I just kept mulling it over. Then, last week, my mom passed away in her sleep. The ceramic cake box jumped into my mind while I was laying in bed on a sleepless night.

I decided to use a photo of the cake as a place to start. I printed three different sizes and pieced it together on foam core board. I used printable, white and clear shrink plastics for the photos of my parents, the candles, skulls and angels as well as a photo of a beaded Virgin of Guadalupe. I did the beading with some instruction from my buddy, Beth. Check out her web site, it's awesome! (http://sparklingsoulstudio.com/default.aspx).When the glitter came out, that was all she wrote. It's everywhere now. I'm not sure I'll ever get it cleaned up. I'll be blowing glitterboogers for a week.
The finished product is below. I shouldn't say "finished" because I'm sure I'll come across things now and then that remind me of my parents and I'll just have to add on. But, for now...

Terrorific Tuesday 2009 Week 4

Trick or Treat!
Frame and post it note holder dressed for Halloween

Costumed Kokeshi Dolls
Try out a Halloween idea for a traditional Japanese doll with Crafterella

Halloween Mask
Phyllis Dobbs created a fun and easy Halloween mask - great for adults and kids!

Fun Halloween Lanterns
Stephenie Hamen accessorizes plain paper lanterns with her paper punches.

Black Widow & Bloody Necklaces
Pattie Wack uses 3-D paint to create chokers that will creep out your party guests!

Tutu Cute Halloween Wreath
Vanessa creates an inspired wreath made of tulle!

Mad Scientist Party
Amy of Living Locurto shares a slew of fun ideas to host your own Mad Scientist Party.

Halloween Zombie Dolls
Crafty Chica shows how to add some zombie love to your decor!

Halloweenies!
Boopsie Daisy shares some of the wonderful Halloween dollies that she dreams up!

Crafty Chica's Ghost Story!
Kathy Cano-Murillo shares a haunted crafty tale!

Halloween Cone Witches
Make these cute little paper cone witches for Halloween!

Halloween Leftovers
Mel takes the leftovers from last week's project and makes a cool Goth choker!

Brenda Pinnick Halloween Owls
Seasonal Owls for Scaring or Delighting Trick or Treaters

The Impatient Crafter
Margot creates another spooktacular mixed media necklace with a bite.

Halloween Batty Windchime
Heidi Borchers creates a super cute windchime with personality!

Kitschy Kitschy BOO
Add some Halloween flair to your day with this cute kitschy bracelet and earring combo!

Simple Halloween Gift Tags
Studio Mama makes a strong impact with these quick and easy tags!

Strands of Beads
Melissa once again gives some pretty flower beads a Gothic makeover with this simple earring design

Costume Fun
Sharron Westerfield shares her passion for costume-making and the joy it brings her grandchildren.

Return of the Birthday Zombie
Candace is cracking herself up with this ghoulish gift box idea

Doodle Pumpkin
Swelldesigner a.k.a. Alexa Westerfield shows you how to make a fun pumpkin on the fly!

My Parents

This is my parents' wedding picture. That was 1949. My dad passed in May, just short of their 60th anniversary. Mom passed this week. They were wonderful, loving parents and we will miss them.

Date Night at the Mayan Adventure

Tuesday is date night for my hubby and me. Last night he surprised me with dinner at the Mayan Adventure in Sandy, Utah. It's a very cool theme restaurant with temple carvings and cliff divers.

It's hard to tell from this picture, but all the tables are in view of this cliff set up. When the divers are doing their bit, there's water falling all over it. When there's nothing going on you can see a face carved in the stone, with glowing eyes.

Here's our dessert. A chocolate explosion cake! Yum!

Terrorific Tuesday 2009 Week 3

Spooky Spider House
Silvia creates a miniature haunted house that is spooky and oh-so fun!

Witchy Embroidered Postcard
Sharron Westerfield brews up a whimsical witch postcard

The Impatient Crafter
Vintage plastic owls become the focal point of a charming necklace you can wear for Halloween and all year round!

Pumpkin and cat felt treat bag
Felt bag that can also be made as a wall hanging or door hanger

Cheryl Ball's Halloween Door Hangers
Create these door hangers from inexpensive gloves for Trick of Treaters

My Big Mouth
Make a creepy wire tree just in time for Halloween!

Mel's Day of the Dead Necklace
Linked chain, skulls and spiderwebs for Dia de los Muertos

Crafty Chica's Matchbook Shrines
Adorable little folding shrines that fit in your pocket!

Paper Pumpkin
Make a plump paper pumpkin from some strips of paper plus a little Halloween craftiness!

Polymer Clay Zombie
Candace's diabolical plan to populate the world with zombies continues!

The Impatient Crafter for iLoveToCreate
Make a retro style styrofoam ornament into a fab Halloween Party centerpiece! Madge shows you how using iLoveToCreate products!

How to Make a Spooky Spice Rack
Come make a spooky spice rack with Crafterella, she's sharing her unique labels with everyone!

Halloween Treat Tote
Conjure up a quick Halloween cupcake basket using new ScoreBoard dies!

Brenda Pinnick's Halloween Banner
A little scary, a little fun, this delightful banner celebrates all things Halloween. Made using Brenda Pinnick Sizzix dies, glitter and ribbon.

Creepy Candlesticks
Pattie Wack turns mini pumpkins into a boo-tiful Halloween lighting idea!

Strands of Beads
Melissa explores the holiday possibilities in a black and white checkered bead

Glow in the Dork Wall Hanging
Turn off the lights and have a laugh with this goofy wall hanging from Alexa Westerfield!

Picture Perfect Pumpkin
Vanessa Coppola turns a traditional pumpkin into a decopauged masterpiece!

Return of the Birthday Zombie

DVD Gift Box

This is a polymer clay zombie that I made for my dear friend, Beth. She and her family love zombie movies, so I came up with an idea to make the gift as cheesy as a great zombie flick. I made the zombie using polymer clay. See the Polymer Clay Zombie blog entry from last week's Terrorific Tuesday post to learn how to make your own zombie. I made him one half of an Origami box to stand in, but you could use any box. I used some Photoshop techniques on a photo I'd taken of a graveyard for the background. I tore the edges and browned them up with a sienna stamp pad and glued the pieces to the back and sides of the box.

Next I composed the following letter to go with it. If you're a zombie officianado you'll see where this is going. If you're not, I'll say this: George Romero made the first zombie classic Night of the Living Dead - It takes place in a small town in western Pennsylvania - If you're bitten by a zombie, you become one (some consider this the Zombie Virus) - Where ever zombies go there is mayhem - The most famous line from the movie is "They're coming to get you, Barbara".

Here's the letter:
Dearest Beth,

I was looking on line and found this killer cake decorator, Barbara, who makes these fabulous cakes. She works at a place called Romero’s, in a small town in western Pennsylvania. I called her up and told her about you and the kind of things you like. I was so excited! She said she’d make something spectacular for you. So, yesterday I got this strange email from the owner of the bakery:

Dear Candace,
You should know there’s been a terrible virus going around our town. None of my staff showed up at all today. Barbara started your cake, but couldn't make it in either. There are several fires in town and things are a mess. I called my delivery guys, who said they could go pick her up. I called her and said “They’re coming to get you, Barbara”, and she screamed and hung up. She never showed and I can’t get hold of the delivery guys, either. I’ve finished the cake myself and will deliver it personally. I hope it will meet your approval.
Sincerely,
George

So, in the process of moving to Utah and, yes, that's my excuse - I missed Beth's birthday. As I was putting together ideas for Alexa Westerfield's Terrorific Tuesdays, I printed photos of the birthday zombie and made them into earrings. See the SugarSkull Bracelet & Bats in the Belfry Necklace, and Candy Corn Riot Earrings blog entries, if you want to use this idea. They have all the directions you might need for shrink plastic and earring making. With one exception - to make your earrings from a photo, you'll need the inkjet printable shrink plastic.
I figured I'd send along a note set up like a movie poster and title it:

RETURN OF THE BIRTHDAY ZOMBIE.

Now, I was looking around the house for a box to send the earrings in and then it hit me - I had some old DVD cases that I'd been saving for some scathingly brilliant idea, and finally I had one!
Here's what I ended up with...

The front cover says:

Return of the Birthday Zombie

Send in the Clones

The movie that no one wanted to see made

Has been Made!

See the zombie clones arrive late for Beth's Birthday!

Well, they had a really long way to walk and zombies are slow anyway!

You laugh! you’ll Cry! You’ll hurl!

The back cover says:

This film has not yet been rated

Void where prohibited by law

Do not put on these earrings while driving

No zombies were harmed in the making of these earrings

Do not wear these earrings while squeezing your head through your stair rails as they are large and might sustain damage Here's what you'll need to make your Zombie (or any kind of) Movie Gift Box.

A DVD case

A DVD
Photos that you can size appropriately

A heavy duty hole punch

Glue

Double sided craft tape

A scrap of card stock, any color

Scissors

If you don't have a printer at home, make copies at the library or neighborhood copy store. Make extras for good measure. Speaking of measuring, you'll need the measurements of the DVD case. This can be done easily by taking the paper out of the DVD cover and measuring it. Easy peasy!

I did mine with Photoshop, but I could just as easily done it as a collage. Just make sure that the collage will easily fold to slip into the DVD case, if you choose this option.

For the DVD, place a disc on your extra copy and trace around it. Cut the copy giving a bit of extra margin to trim. Now smear a thin coat of Aleene's Quick Dry Tacky Glue on the disc and put your cut image on it. Trim the edges with a craft knife and cut out the center hole.

Punch two holes to put the earrings through (if you're doing that) and tape the backs, so the earrings won't slide out. Ohh, I just had an idea! Since the center of my DVD that got cut out was a cake, I decided to add it back.

I got another copy of the photo and cut loosely around the cake. Next I used a double sided craft tape to stick the cake to a piece of card stock. Then I cut the cake out and used a sticky craft dot to attach the cake to the image just below the hole. Since the earrings are taped on the back of the disc, I want Beth to be able to take the disc out of the case. She'll press on the cake to release the disc!
Now, go! Go make your DVD case gift box! You're welcome to use the zombie letter and figure ideas, if you like!

Polymer Clay Zombie

Oh no! The zombies got to Earl the Squirrel while he was in his day job clothes! Earl would be mortified if he realized...you know, he always thought he'd be a cool looking zombie with his mullet and ACDC t-shirt. But, no. No cool zombie image for the Squirrel.
My buddy Cindy turned me on to a book by Maureen Carlson called Fairies, Gnomes and Trolls. The instructions and tutorials are awesome! So, I was doing a polymer clay class for my friends, Laura and her way cool son, Tommy. I think we were making canes. Anyway, at the end of the class, Tommy made a tiny Freddy Krueger from the leftover clay. We decided they should come back and do a zombie making class! We used the same methods that Maureen Carlson shows in her book and it was way too much fun! We were joined by fellow zombie enthusiast and dear friend, Beth. I had made a birthday zombie for her which I'll feature in another blog. Standing in the back ground here is the Elvis impersonator zombie.
Supplies:
Polymer Clay - black, white, green and as many other colors as you like for clothes and such
Two 18" pieces of floral wire for each zombie
A small amount of aluminum foil
A knitting needle or other tool for smoothing the clay
A craft knife
A red gel pen for blood
A means for baking the zombie - a toaster oven reserved for crafts or a conventional oven that you only use for crafts occasionally.


Begin by folding one 18" piece of floral wire in half and in half again. Twist an opening in the middle of the wire for the head, a little further down twist an opening for the body and fold a small amount of wire on the ends for feet. If you can make it stand on its own, you're off to a good start. If you can't, don't worry the clay feet will still work.

Crumple bits of foil and wrap around the head, body and legs.

Fold the other piece of floral wire the same way you did the first piece and wrap it around the neck a couple of times.

Condition your polymer clay by squishing, folding and rolling it with your hands until it's very pliable. If you haven't worked with polymer clay before follow these rules for the best results:Hold the piece you're working on as though it was a baby bird - any pressure you put on it will change the shape,

AND

Smooth the clay with a very soft touch as though you were petting a fuzzy Caterpillar

Mix bits of black and green clay into a ping pong ball sized piece of white clay until you have the skin color you want. You can always reserve your zombie skin color for later, but it's not easy to match the color if you run out.

Take a marble size piece of skin color rolled into a ball and flatten it to about an 1/8 " thick. Wrap it around the head of your zombie starting under the chin and around to the back. Don't worry about how the back looks, unless your zombie doesn't have hair.

Follow the same steps to cover the neck and chest area of the body, assuming of course that you're going to have an open collared shirt.

Smooth the neck where you join the two pieces by very gently rolling a knitting needle over the joint until it's no longer visible.

Earl's wearing his day job suit, so I started covering the frame with a basic shirt shape and pant legs.

Again, it starts with marble size pieces. Roll each one into a ball then flatten into the shapes you need. Smooth the joints.

Use the same method as before to make the sleeves.

Take a large marble size of the color that will cover the back, flatten and gently press into place. Take a bit of the shirt and pants colors to make a collar and waste band. Flatten two marble size pieces of pants color into elongated tear drop shapes. Attach them to the front of the jacket, narrow end up and smooth the joints.

Now add bits of the shirt color in the the ends of the sleeves. Stick two balls of your shoe color onto the bottom of the pant legs.
The hands and face are the most delicate so I save them for last. Here's where I add some gore. I pushed some flesh color on the belly and add a bit of shirt color to look like a torn shirt.
Use your craft knife to open the mouth
Roll a small bit of white clay that's wider in the middle than the ends. Press into place with the back side of the craft tool and define the teeth as well.
Use the knitting needle to open eye holes. Press in then wiggle a bit to widen. Roll tiny bits of white for the eyes. Place them gently into the eye sockets. The idea is to add eyelids without squashing the eye.

This is how Maureen Carlson lays out the facial features. I just love it! It makes it so easy to understand the face. Make these pieces smaller than you think you'll need them. You can always add more clay, but it's hard to take it away without distorting your work. The only thing missing are the upper and lower eyelids.

The eyelids are very small and should not cover too much of the eye. Again, very gently put them into place and smooth with the knitting needle. If they begin to cover too much of the eyes, very carefully remove clay with the craft tool. Add the forehead piece and smooth.

Now put the nose, lips and cheek pieces on and smooth. Take your time with this, it really gives the zombie character.

Now is the time to consider the facial expression. Is he snarling, or do you want his jaw slack? Are there cuts on his face? Maybe he's missing an eye, or even missing one side of his face? Zombie it up!

Now make holes in the ends of the arms to attach hands.

The hands start as mitten shapes, then use your craft knife to separate the fingers. The Elvis impersonator zombie is missing some fingers. That's okay, too. Body parts fall off. It's a fact of zombiehood.

Add hair and then ears. I made the hair colored clay by adding a small amount of white to brown clay. Then I conditioned it, rolling, folding and twisting, until there were tiny stripes of white. It didn't start out to be a mullet, Earl just wouldn't have it any other way. Plus, I have hair issues. Who knows, the next one could have a comb-over.

Bake according to the directions of the clay you're using. If you bake him in a toaster oven, lay him down for baking so his head doesn't burn. Ideally, he should bake standing up, but, if you do that, put a Pyrex cup (or other heat safe props) in front and back of him. After the zombie cools, you can use a red gel pen to add blood.

It's ALIVE!

It's not uncommon for slight changes to occur in baking that make it hard for your zombie to stand on his own. Do not despair. Glue him into a deep frame with a ghoulish background, like so...
This is just half of a folded paper box. I printed a background, tore the edges to fit and marked up the paper with an ink pad.

Have fun!

Terrorific Tuesday 2009 Week 2

Another week! Another helping of Halloween goodness. Check out what the fabulous crafters from all walks of life are up to this Terrorific Tuesday for the second week of October!

This little lightLight up the night with this cute pumpkin votive holder from Kat the Fearless Crafter.

Sugar Skull Bracelet & Bats in the Belfry ChokerCandace is having way too much fun with shrink plastic! Check out these fun and charming crafts on the Spirit Clay blog.

Dollar Tree Decorated Lights TutorialCome and decorate some Dollar Tree Skulls with Crafterella, don't forget your sharpie markers!

The Impatient Crafter for iLoveToCreateWhip up a Halloween Invitation that's a real 'hoot' with Madge in this project for iLoveToCreate!

Spooky Halloween CoastersCheryl Ball of Still Crafty After 50 shares some fun, funky, and spirited coasters!

Halloween Treat BowlCreate a fun and festive treat dish with Inspired at Home!

Strands of BeadsMelissa creates a whimsical seasonal necklace based on the theme "pushing up daisies".

Basic Black Box Meets Pumpkin PatchWhip up Halloween favor boxes in minutes with brand new Sizzix ScoreBoard dies.

Mummy MannequinCreate a mummy that will be a memorable accent at your Halloween party with Pattiewack!

Munchkin Mama's Crispy Peanut Butter BallsMunchkin Mama has a great recipe for no bake peanut butter balls that the whole family will want to make!

Witch Parking!!Make a "Witch Parking" sign on the Mucky Finger's blog!

Vintage-Inspired Halloween Tree TopperShannon shows off her new Halloween tree topper, inspired by vintage crepe paper crafts!

The Impatient CrafterMake a whimsical and elegant Halloween necklace with Madge!

Jack-O-Lantern WaterfallsStudio Mama shows you how to make some fun and festive earrings for the Halloween season.

Glow in the Dark JewelryUse glow in the dark polymer clay and rubber stamps to produce eerie Halloween jewelry.

Crafty Chica's Paint Drip Pumpkin!A loca idea on the fly turned out muy fantastico!

Free Printable Halloween Cup SleevesYou’ll be a hit with these labels for hot beverages at your Halloween party.

Scarecow SweatshirtSharron Westerfield shares a cute scarecrow sweatshirt she made from a fun downloadable pattern from Janome!

Halloween Ribbon Brooches and FascinatorsAlexa Westerfield a.k.a. Swelldesigner whips some quick and cute Halloween accessories!

R.I.P. Skeleton in CoffinGuarantee a spooktacular Halloween Party with a skeleton in a coffin treat filled centerpiece!

Happy October KewpiesFind inspiration in this colorful and cute candy corn Kewpie photo from Boopsie Daisy!If you would like to join in the fun next week, e-mail Alexa at swelldesigner@yahoo.com and put in your subject line "Terrorific Tuesday". She'll get you added to the group!

Sugar Skull Bracelet and Bats in the Belfry Choker

Supplies

1 pack of assorted shrink plastic, including white and black
scissors
Dowel (about 1/4 inch) or other instrument to wrap wire around
Fine point permanent markers - black, pink, orange, green & purple
Stretchy beading string
Needle nose pliers
Colorful seed beads
Assorted beads you might want on your bracelet
Pewter cross charm
24 Gauge wire, any color
Hole punch
Acrylic spray sealer

For the Bats in the Belfry Choker you will want to add these as well

Opaque gel pens - white and any color you want for the bat's eyes
Orange and purple narrow ribbon
Narrow black cord

Shrink plastic is a wonderful medium for turning hand drawn elements into jewelry. I love the holiday Day of the Dead! It happens around Halloween, but it's a celebration of ancestry. I'm so inspired by the colors and imagery. The humorous skeletons represent our loved ones doing the things they loved to do in life. Sugar skulls are a popular treat. This project was designed to honor the artistic and spiritual women in my family line. Below are a couple of ceramic skulls I've made.

I used white shrink plastic for the skull charms and punched them out with Martha Stewart's skull punch (you can freehand skulls and cut them out yourself if you prefer - more about that below). I used fine tip permanent markers to make a design that I drew on both sides of all seven skulls. I only used five skulls for the bracelet, I saved two to make earrings. So let's get started!
Create your sugar skull design and bake the shrink plastic according to the directions. Don't forget to punch a hole in each skull BEFORE baking. After baking, protect your designs by spraying the skulls with a sealer
To turn the skulls into charms, you'll want to do some wire wrapping. The wrapping I do for bracelets is fairly large so the charms will move easily. Start with about six inches of 24 gauge wire (any color), wrap twice around a 1/4 inch dowel (or anything you can find that's about that diameter - I used a chopstick). Twist to secure. Slide the double loop off the dowel.
Beginning close to the double loop, wrap the wire around once and slide it off the dowel without twisting.
Pick out some colorful seed beads and slip three or four on the open loop. Slide a skull onto the loop and add three or four more beads onto the loop (you can use more or less if it suits your fancy). Put the loop back on the dowel (this helps your loop keep it's shape) and twist.
Wrap around and around to make a big messy middle on the charm. Repeat for as many skull charms as you want.
The bead charms are just a little different. Make your double loop. Thread the long end of the wire through a bead . Wrap the wire around the bead, back to the middle and make your messy pile. Take care to tuck the end of the wire in as close as you can with needle nosed pliers so it won't snag your clothes
Cut a ten inch length of stretchy bead string. Lay out it out with your charms on one side and several possible bead choices on the other side. This makes it easy to begin stringing the bracelet. It takes me many tries to get the look the I want at a length that works, so don't be disappointed if you don't get it just right the first time.
This is how the knot should be tied, according to the the stretchy string people.

Bats in the Belfry Choker

Along the same lines as the sugar skull charms, you can draw funky skulls and bats to make into charms. I used permanent markers on the white shrink plastic and opaque gel pens on the black shrink plastic for the bats. The pictures below show the size of the skulls and bats when I cut them out and their size after baking. You can get a variety pack of shrink plastic that includes the white, black, brown and frosted shrink plastic for about $5 at Michael's. Don't forget to punch holes before baking and spray with sealer after.

For the choker I used glass candy corn beads and strung the whole bunch on on purple wire. I made loops on the ends of the wire and tied bits of black cord and purple and orange ribbon to tie around the neck. I left several inches in front, fraying the black cord and then added some shorter pieces of the ribbons. I braided the long ends to make them easier to tie.